1000HP Fracturing Pump Skid

Product Introduction:

The Model 1000 Pump Skid Drilling Pump Unit (Russian designation УН-746Д) is used for high-pressure injection of cleaning fluids and circulating mud into the well during drilling operations. The injected drilling fluid serves to clean the well bottom and the rock drilled from the wellbore, carrying the rock to the surface, while also cooling the drill bit and driving the downhole hydraulic motor.

Product Features:

All components of the equipment are installed within a standard insulated container, primarily including the following parts:

(1) Diesel engine, (2) Fuel system (fuel tank capacity: 1000L), (3) Hydraulic transmission, (4) Universal drive shaft, (5) KH-1000HP (5ZB-1000 LONG) type plunger pump, (6) Suction manifold, (7) Discharge manifold, (8) Lubrication system, (9) Control system Siemens CPU 1214C and Weintek MT3070B touch screen, (10) Electrical system, (11) Pneumatic system, (12) Interior space heater, (13) Booster pump - 1 set, Accumulator - 1 set.

Product Parameters:

Maximum working pressure: 43 MPa (3" plunger)

Engine on skid: KTA38-C1200

Engine power: 1200 hp (max, intermittent), 980 hp (continuous)

Transmission: ALLISON S8610M

Maximum displacement: 24 L/S (3" plunger)

Operating point 1: 15 L/S at 35 MPa

Operating point 2: 3 L/S at 7 MPa

Control system: Networked control system

External dimensions: 8300X2450X2850 (mm) for reference

Total weight: 25000 kg (including oil, water, and other operational fluids: lubricant, coolant, etc., for reference)

Installed plunger: 3 inches